14 May 2024 - 1 hour
Just a quick bit of work out in the garage tonight. I clecoed up the rudder skins to the skeleton and match drilled all the holes from the skins to the spars, ribs, and trailing edge wedge. I didn't get the reinforcement plates to the spar drilled so I'll have to remember to get those when it comes back apart...
I will admit that I'm dragging my feet a bit on the rudder, now, as all you hear about is how difficult the trailing edge is to get right. I'm doing some research about the best way to attack this part so I can get it in the rear view mirror.
More to come!