Wings [186.8 hours]

• [10 Mar 2023] - 2.5 hours - Wing kit delivered and began inventory and unpacking
• [11 Mar 2023] - 2.0 hours - Finished wing kit inventory and put stuff away

Spars [22.4 hours]

• [25 Jan 2025] - 2.5 hours - Inspected and marked spars, countersinking for nutplates
• [29 Jan 2025] - 0.7 hours - Primed countersinks, clecoed nutplates to spar
• [1 Feb 2025] - 1.7 hours - Started riveting nutplates to spars
• [2 Feb 2025] - 1.8 hours - Finished riveting on nutplates, started countersinking spar for screws
• [8 Feb 2025] - 1.5 hours - Finished countersinking tank nutplates, started tie down brackets
• [9 Feb 2025] - 0.7 hours - Drilled for nutplates on tiedown brackets
• [9 Mar 2025] - 2.5 hours - Finished tiedown brackets, dimpled wing access hole covers
• [15 Mar 2025] - 4.5 hours - Deburred, trimmed, and drilled rear spar reinforcements
• [16 Mar 2025] - 1.5 hours - Deburred rear spar parts, countersunk tip doublers, dimpled select holes
• [11 May 2025] - 5.0 hours - Finished rear spars and finished prepping ribs

Wing [85.3 hours]

• [2 May 2025] - 3.0 hours - Primed rear spar doublers, started deburring wing ribs
• [4 May 2025] - 1.5 hours - Continued deburring wing ribs
• [9 May 2025] - 1.2 hours - More rib deburring...
• [10 May 2025] - 3.0 hours - Even more deburring
• [16 May 2025] - 1.5 hours - Started drilling conduit holes in ribs
• [18 May 2025] - 4.0 hours - Finished drilling conduit holes, drilled and deburred wing ribs and spars
• [30 May 2025] - 1.5 hours - Prepared left wing ribs for priming
• [8 Jun 2025] - 3.0 hours - Prepped right wing ribs, primed wing ribs
• [21 Jun 2025] - 3.0 hours - Finished priming rear wing spars, started riveting ribs to spars
• [22 Jun 2025] - 2.5 hours - Finished riveting wing ribs to front and rear spars
• [23 Jun 2025] - 1.5 hours - Built the wing stands
• [26 Jun 2025] - 1.2 hours - Clecoed top wing skins to skeletons
• [27 Jun 2025] - 3.5 hours - Started match drilling wing skins
• [5 Jul 2025] - 4.0 hours - Finished drilling main skins, cradle, started leading edges
• [20 Dec 2025] - 2.0 hours - Deburred left wing leading edge
• [21 Dec 2025] - 2.0 hours - Deburred right leading edge and started on the skins
• [4 Jan 2026] - 3.0 hours - More wing skin deburring
• [6 Jan 2026] - 1.0 hours - Removed vinyl on last of wing skins
• [8 Jan 2026] - 2.7 hours - Finished deburring wing skins
• [11 Jan 2026] - 0.5 hours - Dimpled tank splice plate
• [13 Jan 2026] - 2.0 hours - Removed tank attach nutplates from spars
• [25 Jan 2026] - 1.0 hours - Dimpled leading edge ribs
• [31 Jan 2026] - 2.3 hours - Finished deburring wing skeleton, dimpled wing ribs
• [1 Feb 2026] - 4.5 hours - Finished dimpling wing skeleton, countersunk spar
• [6 Feb 2026] - 2.7 hours - Riveted correct nutplates to spars
• [8 Feb 2026] - 3.4 hours - Tank screw countersinks, riveted top rivet in ribs, dimpled leading edge skins, started scarf joints
• [15 Feb 2026] - 4.0 hours - Prepped and primed leading edge parts, clecoed leading edges together
• [20 Feb 2026] - 1.7 hours - Left wing leading edge access panel
• [21 Feb 2026] - 2.0 hours - Started riveting leading edges
• [7 Mar 2026] - 2.6 hours - Finished riveting right leading edge
• [14 Mar 2026] - 3.5 hours - Riveted left leading edge
• [21 Mar 2026] - 3.5 hours - Attached right leading edge to wing, primed top inboard wing skins
• [29 Mar 2026] - 2.0 hours - Dimpled left inboard top skin, primed outboard top skins
• [30 Mar 2026] - 2.0 hours - Dimpled outboard top wing skins
• [12 Apr 2026] - 2.5 hours - Attached left leading edge to wing

Tanks [74.6 hours]

• [6 Jul 2025] - 4.0 hours - Made tank attach brackets
• [12 Jul 2025] - 2.5 hours - Made fuel tank stiffeners
• [19 Jul 2025] - 4.0 hours - Fit tank skins to ribs, drilled leading edges, started drilling tanks
• [20 Jul 2025] - 2.5 hours - Drilled and countersunk tank skins
• [6 Aug 2025] - 2.5 hours - Disassembled tanks, started working on tank brackets and other small bits
• [7 Aug 2025] - 1.0 hours - Drilled tank brackets, located center of tank access hole
• [16 Aug 2025] - 0.7 hours - Cut tank access and vent line holes in inboard ribs
• [17 Aug 2025] - 2.0 hours - Drilled, dimpled, riveted tank access doublers to ribs
• [21 Aug 2025] - 1.0 hours - Drilled tank drains and gas cap flanges
• [7 Sep 2025] - 3.0 hours - Deburred gas tank ribs, stiffeners, and skins
• [9 Sep 2025] - 1.0 hours - Scuffed tank parts in prep for tank sealant
• [10 Sep 2025] - 1.0 hours - Dimpled tank ribs and stiffeners
• [13 Sep 2025] - 2.0 hours - Dimpled tank skins
• [14 Sep 2025] - 1.0 hours - Drilled, deburred, and dimpled tank attach screw holes
• [17 Sep 2025] - 2.0 hours - Riveted left tank stiffeners
• [18 Sep 2025] - 1.5 hours - Riveted fuel tank drains
• [19 Sep 2025] - 2.5 hours - Riveted right tank stiffeners and fuel cap flanges
• [19 Oct 2025] - 2.0 hours - Riveted first rib into left fuel tank
• [26 Oct 2025] - 6.0 hours - Riveted last four interior ribs into left fuel tank
• [2 Nov 2025] - 1.5 hours - Riveted first interior rib into right fuel tank
• [7 Nov 2025] - 2.5 hours - Riveted two more interior ribs into right fuel tank
• [14 Nov 2025] - 2.5 hours - Riveted the last two interior ribs into the right fuel tank
• [15 Nov 2025] - 4.0 hours - Riveted outboard rib to both tanks
• [16 Nov 2025] - 4.0 hours - Riveted inboard rib and tank attach bracket to both tanks
• [19 Nov 2025] - 1.5 hours - Adjusted fuel floats, riveted fuel sender nutplates
• [23 Nov 2025] - 3.0 hours - Installed fuel vent lines and fuel pickups
• [4 Dec 2025] - 2.5 hours - Prepared baffles, extra sealant on right tank
• [7 Dec 2025] - 4.5 hours - Installed right tank baffle and Z-brackets
• [12 Dec 2025] - 0.7 hours - Finished up the right tank!
• [13 Dec 2025] - 3.1 hours - Installed the left tank baffle
• [18 Dec 2025] - 0.6 hours - Installed left tank Z-brackets
• [19 Dec 2025] - 1.0 hours - Finished up the left tank!
• [27 Dec 2025] - 1.0 hours - Tested left tank for leaks